DESCRIPTION:
The JS 436A Hand Held Power Trowel is an epitome of efficiency and convenience, crafted for rapid lifting and leveling post-concrete pouring. Lighter and more cost-effective compared to the JS 950, it boasts a Long Box Body Reducer. With a generous working diameter of 900-1000mm, it glides effortlessly, equipped with four precision blades rotating within a safety cage, ensuring superb polishing and radiant finishes. Whether for initial construction or subsequent maintenance, the JS 436A guarantees stellar performance and enduring durability.
Product parameters:
| JS436A Technical number parameter |
| Model |
JS436A |
| Engine brand |
HondaGX160 /GX200/ B&S XR5.0HP/XR6.5HP |
| Engine power |
5.5HP /6.5HP/ 5.0HP/6.5HP |
| Diameter |
950mm |
| Speed |
60-165RPM |
| Weight |
75/78/80kg |
| Shape size |
2000*960*880mm |
| Blade size |
150*350*1.6mm |
| Disc |
Φ94/98/100cm |
| Reducer type |
long box/square box |
Product features:
1. Low center of gravity design ensures stable and smooth operation.
2. Oversized gear box significantly extends service life.
3. Precision screw knob control system for accurate blade adjustments.
4. Automatic centrifugal flameout switch for enhanced safety.
5. Detachable handle for effortless transportation and storage.
6. Adjustable handle for optimal operator comfort and control.
Instructions for product use:
1. Before starting, ensure the addition of transmission oil, engine oil, and gasoline.
2. To start, pull the starting rope several times. If below 10ºC, temporarily close the damper switch, reopening it post-start.
3. Withboth hands firmly on the handle, adjust the throttle controller to achieve optimal working speed.
4.Adjust the central hand knob to fine-tune the blade angle based on construction requirements.
5. To shut down: A. Lower the throttle switch controller to its minimum setting.
B. Turn the parking device (safety valve) to OFF to stop the engine, or simply turn off the engine to ensure the power is off.
6. After use, avoid placing the machine on freshly finished cement surfaces to prevent bonding. Always clean debris from the blade and knife arm protective cover post-operation.
For any inquiries or interest in the JS 436A, please don't hesitate to reach out.
){kind=link}