DESCRIPTION:
JS60 power trowel machine is a small concrete surface, coarse, fine polishing equipment. Working diameter is 600mm. This machine dual use, use the first wipe after the light. Mainly used for concrete pavement, cement ground, municipal engineering, the light, pressure, corner of the edge, small corridor and indoor, column around the corner and other similar environment of the edge and light, after the construction of the machine surface smooth, smooth, can improve the concrete surface compaction, wear resistance. It is more than 10 times more efficient than manual work. Not afraid of touching the wall, the rotating protection circle to avoid the contact of the blade in the wall, suitable for small and medium-sized aisle wall side, corner around the corner and other similar environment construction operations.
Product parameters:
| JS60 Technical number parameter |
| Model |
JS60 |
| Engine brand |
HondaGX160/B&S RX5.0HP |
| Engine power |
5.5HP/5.0HP |
| Diameter |
600mm |
| Speed |
60-150RPM |
| Weight |
60kg |
| Shape size |
1600*650*950mm |
| Blade size |
150*260*1.6mm |
| Disc |
Φ60cm |
Product features:
1. Small working diameter, small and flexible, and easy to operate.
2. The rotating protective ring avoids the contact between the blade on the wall.
3. The screw knob control system ensures that the blade is adjusted accurately.
4. Centrifugal flameout switch to shut off the engine automatically when out of control.
5. Foldable handle for easy transportation and storage.
6. Highly adjustable handle to ensure operator comfort and easy to control.
Instructions for product use:
1. Prior to operation, ensure the addition of transmission oil, engine oil, and gasoline.
2. To start, pull the starting rope several times; if below 10ºC, close the damper switch temporarily, returning it after starting.
3. Withboth hands firmly on the handle, adjust the throttle controller to achieve the optimal working speed.
4.Adjust the middle hand knob to fine-tune the light piece angle as per construction needs.
5. To shut down: A. Adjust the throttle switch controller to its lowest state.
B. Switch the parking device (safety valve) to OFF, stopping the engine, or turn off the engine itself, ensuring the power supply is OFF.
6. Post-operation, avoid placing the machine on freshly finished cement surfaces to prevent bonding. It's vital to clean debris from the blade and knife arm protective cover after the duty.
For inquiries or interests in the JS60, please do not hesitate to contact me.
){kind=link}